Que signifie votre code Code Défaut BMW ?
Grace au système OBD, les
Bmw
fabriqués après 1996 sont normalement équipés d'une prise diagnostique OBD.
Si l'ordinateur de la voiture rencontre un problème,un code d'erreur ou un code de diagnostic (DTC)
sera stocké dans la mémoire de l'ECU de la voiture.
Avec un lecteur OBD branché sur le port OBD (On-Board Diagnostics) de la voiture, vous pouvez lire la liste des codes stockés, et donc découvrir quel est le problème.
Les codes suivent une formule permettant de savoir généralement quel est le problème avant même de regarder le tableau ci-dessous.
Nous vous présentons ci-dessus une liste très complète des différents codes défauts possibles.
Si le code défaut de votre auto s'affiche au tableau de bord, vous n'aurez peut-être même pas besoin d'un lecteur OBD . il sera dans la liste .
Réparer le code défaut de votre auto, c'est potentiellement simple à faire avec vos revues et méthodes techniques.
Réparer le code défaut de votre auto, c’est potentiellement simple à faire avec nos revues et méthodes techniques
| Code | Libellé |
|---|---|
| E6440B | FD2, K-CAN: line fault |
| E64414 | FD2, K-CAN: Communication fault |
| E65402 | Message (relative time, 0x328) incorrect, receiver: FD2, transmitter: instrument cluster |
| E65417 | Message (dim, 0x202) incorrect, receiver: FD2, transmitter: footwell module (FRM) |
| E65418 | Message (terminals, 0x12F) incorrect, receiver: FD2, transmitter: Car access system (CAS) |
| E65419 | Message (lamp condition, 0x21A) incorrect, receiver: FD2, transmitter: footwell module (FRM) |
| E65420 | Message (LCD brightness control, 0x393) incorrect, receiver: FD2, transmitter: instrument cluster |
| E6841F | EDC: FlexRay: Line fault |
| E68420 | VDM, FlexRray: Communication fault |
| E68487 | VDP, FlexRay Line fault |
| E69416 | No message (status, convertible top, ID: 0x342), receiver: VDM, transmitter: CVM |
| E69417 | Message (status, convertible top, ID: 0x342) out of date, receiver: VDM, transmitter: CVM |
| E6941B | No message (data, driving dynamics sensor extended, ID: 56.0.2), receiver: VDM, transmitter: integrated chassis management (ICM) |
| E6941D | Message (data, driving dynamics sensor extended, ID: 56.0.2) out of date, receiver: VDM, transmitter: integrated chassis management (ICM) |
| E69428 | No message (outside temperature, ID: 0x2CA), receiver: VDM, transmitter: instrument cluster |
| E6942C | KOMBI interface (outside temperature, ID: 0x2CA): Signal invalid |
| E6943A | ICM interface (data, single-track model, driving dynamics, ID: 66.0.2): Signal invalid |
| E6944E | CAS/FEM interface (vehicle identification number, ID: 0X380) Signal invalid |
| E6947E | ICM interface (self-steering response, vehicle, ID: 109.0.2): Signal invalid |
| E69482 | No message (vehicle identification number, ID: 0x380), receiver: VDM, transmitter: Car access system (CAS) / FEM |
| E694B8 | No message (vehicle speed, ID: 0x1A1), receiver: VDM, transmitter: integrated chassis management (ICM) |
| E694BA | Message (vehicle speed, ID: 0x1A1) out of date, receiver: VDM, transmitter: integrated chassis management (ICM) |
| E694BE | ICM interface (vehicle speed, ID: 0x1A1): Signal invalid |
| E694BF | Signal (vehicle speed, ID: 0x1A1) undefined: transmitter: integrated chassis management (ICM) |
| E694C2 | No message (yaw rate, vehicle, ID: 0x19F), receiver: VDM, transmitter: integrated chassis management (ICM) |
| E694C3 | Message (vehicle yaw rate, 56.0.2) incorrect checksum, receiver VDP, transmitter DSC |
| E694C4 | Message (yaw rate, vehicle, ID: 0x19F) out of date, receiver: VDM, transmitter: integrated chassis management (ICM) |
| E694C9 | Signal (vehicle yaw rate, 0x19F) undefined, transmitter ICM |
| E694D0 | ICM interface (ride-height, vehicle, filtered, ID: 0x0E4): Signal invalid |
| E694E8 | No message (actual steering angle, front axle, ID: 57.1.2), receiver: VDM, transmitter: integrated chassis management (ICM) |
| E694EA | Message (actual steering angle, front axle, ID: 57.1.2) out of date, receiver: VDM, transmitter: integrated chassis management (ICM) |
| E694EE | ICM interface (actual steering angle, front axle, ID: 57.1.2): Signal invalid |
| E694F2 | No message (kilometre reading (mileage)/range, ID: 0x330), receiver: VDM, transmitter: instrument cluster |
| E694F6 | Instrument cluster interface (kilometre reading/range, ID: 0x330): Signal invalid |
| E694F8 | No message (terminals, ID: 0x12F), receiver: VDM, transmitter: Car access system (CAS)/FEM |
| E694FA | Message (terminals, ID: 0x12F) out of date, receiver: VDM, transmitter: Car access system (CAS)/FEM |
| E694FC | CAS/FEM interface (terminals, ID: 0X12F) Signal invalid |
| E6950A | No message (configuration, switch, driving dynamics, ID: 0x3A7), receiver: VDM, transmitter: integrated chassis management (ICM) |
| E6950C | Message (configuration, switch, driving dynamics, ID: 0x3A7) out of date, receiver: VDM, transmitter: integrated chassis management (ICM) |
| E6951C | ICM interface (longitudinal acceleration, centre of gravity, ID: 0x199): Signal invalid |
| E6951D | Signal (longitudinal acceleration, centre of gravity, 0x199) undefined, transmitter ICM |
| E69532 | No message (status, radio-operated key, ID: 0x23A), receiver: VDM, transmitter: Car access system (CAS) / FEM |
| E69542 | No message (transverse acceleration, centre of gravity, ID: 0x19A), receiver: VDM, transmitter: integrated chassis management (ICM) |
| E69543 | Message (lateral acceleration, centre of gravity, 55.0.2) incorrect checksum, receiver VDP, transmitter DSC |
| E69544 | Message (transverse acceleration, centre of gravity, ID: 0x19A) out of date, receiver: VDM, transmitter: integrated chassis management (ICM) |
| E69548 | ICM interface (lateral acceleration, centre of gravity, ID: 0x19A): Signal invalid |
| E6958C | No message (relative time, ID: 0x328), receiver: VDM, transmitter: instrument cluster |
| E69590 | Instrument cluster interface (relative time, ID: 0x328): Signal invalid |
| E69591 | Signal (relative time, ID: 0x328) undefined: transmitter: instrument cluster |
| E6959C | ICM interface (target, share, control, steering, ID: 39.1.2): Signal invalid |
| E695A4 | Signal (trailer status 275.0.8) invalid, transmitter AHM |
| E695A5 | Signal (trailer status 275.0.8) undefined, transmitter AHM |
| E695BC | No message (status, stabilisation DSC, ID: 0x173), receiver: VDM, transmitter: ABS |
| E695BE | Message (status, stabilisation DSC, ID: 0x173) out of date, receiver: VDM, transmitter: ABS |
| E695C2 | DSC interface (status, DSC stabilisation, ID: 0x173): Signal invalid |
| E695C3 | Signal (status, stabilisation DSC, ID: 0x173) undefined: transmitter: ABS |
| E695EA | Message (Vehicle dynamic data values stored, ID: 54.1.4) absent, receiver: VDM, transmitter: integrated chassis management (ICM) |
| E695EC | Message (Vehicle dynamic data values stored, ID: 54.1.4) not recent, receiver: VDM, transmitter: integrated chassis management (ICM) |
| E695F0 | Integrated chassis management (ICM) interface (Vehicle dynamic data values stored, ID: 54.1.4) Signal invalid |
| E69658 | No message (status, tyres, ID: 0x369), receiver: VDM, transmitter: integrated chassis management (ICM) |
| E6965A | Message (status, tyres, ID: 0x369) out of date, receiver: VDM, transmitter: integrated chassis management (ICM) |
| E696D4 | No message (data, single track model, driving dynamics, ID: 66.0.2), receiver: VDM, transmitter: integrated chassis management (ICM) |
| E696D5 | Message (data, single track model, driving dynamics, ID: 66.0.2) out of date, receiver: VDM, transmitter: integrated chassis management (ICM) |
| E69709 | Integrated chassis management (ICM) interface (Request crankshaft torque ARS, ID: 35.3.4) Signal invalid |
| E697BB | DSC interface (actual braking torque, sum, ID: 0x0EF): Signal invalid |
| E697C1 | No message (actual wheel speed, ID: 46.0.1), receiver: VDM, transmitter: ABS |
| E697C3 | Message (actual wheel speed, ID: 46.0.1) out of date, receiver: VDM, transmitter: ABS |
| E697C5 | DSC interface (actual wheel speed, ID: 46.0.1): Signal invalid |
| E697C6 | Signal (actual wheel speed, ID: 46.0.1) undefined: transmitter: ABS |
| E69A31 | ICM interface (self-steering response, vehicle, ID: 109.0.2): Signal invalid |
| E69A3B | No message (vehicle adaptation, ID: 272.6.8), receiver: VDM, transmitter: integrated chassis management (ICM) |
| E69A3D | ICM interface (vehicle adaptation, ID: 272.6.8): Signal invalid |
| E69A3E | ICM interface (vehicle speed, ID: 0x1A1): Signal invalid |
| E69A41 | ICM interface (ride-height, vehicle, filtered, ID: 0x0E4): Signal invalid |
| E69A53 | ICM interface (actual steering angle, front axle, ID: 57.1.2): Signal invalid |
| E69A57 | ICM interface (longitudinal acceleration, centre of gravity, ID: 0x199): Signal invalid |
| E69A62 | ICM interface (lateral acceleration, centre of gravity, ID: 0x19A): Signal invalid |
| E69A69 | ICM interface (target, share, control, steering, ID: 39.1.2): Signal invalid |
| E69B18 | No message (vehicle ride height, ID: 0x0E4), receiver: VDM, transmitter: integrated chassis management (ICM) |
| E69B1A | Message (vehicle ride height, ID: 0x0E4) out of date, receiver: VDM, transmitter: integrated chassis management (ICM) |
| E69B1C | ICM interface (ride-height, vehicle, ID: 0x0E4): Signal invalid |
| E69B1D | Signal (ride-height, vehicle, ID: 0x0E4) undefined: transmitter: integrated chassis management (ICM) |
| E69B2C | No message (longitudinal acceleration, centre of gravity, ID: 0x199), receiver: VDM, transmitter: integrated chassis management (ICM) |
| E69B2E | Message (longitudinal acceleration, centre of gravity, 55.0.2) incorrect checksum, receiver VDP, transmitter DSC |
| E69B2F | Message (longitudinal acceleration, centre of gravity, ID: 0x199) out of date, receiver: VDM, transmitter: integrated chassis management (ICM) |
| E69B50 | DSC interface (target, braking torque, sum, coordinated, ID: 63.1.4): Signal invalid |
| E69B51 | Signal (target, braking torque, sum, coordinated, ID: 63.1.4) undefined: transmitter: ABS |
| E69B7C | Message (Status vehicle level control, ID: 259.3.4) absent, receiver: VDM, transmitter: EHC |
| E69B7E | Message (Status vehicle level control, ID: 259.3.4) out of date, receiver: VDM, transmitter: EHC |
| E69B80 | Integrated chassis management (ICM) interface (Status vehicle level control, ID: 259.3.4) Signal invalid |
| E69B81 | Signal (Status vehicle level control, ID: 259.3.4) undefined: Sender EHC |
| E69D32 | Message (tyre information, 275.2.8) not current, receiver VDP, transmitter DSC |
| E69D9E | Signal (tyre information, 275.2.8) invalid, transmitter DSC |
| E69E30 | Message (tyre information, 275.2.8) checksum error, receiver VDP, transmitter DSC |
| E6A400 | Bus failure (Flexray) - Initialisation failed |
| E6A401 | Bus failure (Flexray) - Synchronisation lost |
| E6A402 | Bus failure (Flexray) - POC Status stop |
| E6AC05 | Signal (outside temperature, 0x2CA) undefined, transmitter KOMBI |
| E6AC1A | Signal (vehicle identification number, ID: 0x380) undefined: transmitter: Car access system (CAS) / FEM |
| E6AC2A | Signal (kilometre reading / cruising range, ID: 0x330) undefined: transmitter: instrument cluster |
DEFINISSEZ VOTRE MARQUE POUR ACCEDER A VOS CODES DEFAUTS
LES PRODUITS DISPONIBLES POUR VOTRE AUTO
-
Revue technique RTA
Revue Technique Automobile
La revue technique de référence depuis 1946. La RTA est une revue papier pour tous publics, qui vous permet d'effectuer les petites et les grosses réparations
Voir le descriptif
-
Entretien courant MTA
Méthode Technique Automobile
La MTA est issue de nos outils destinés aux pros de l'auto. Ces méthodes en ligne permettent d'effectuer les opérations de maintenances de votre auto (filtres, courroies, etc.)
Voir le descriptif
-
Toutes réparations MTAx
Méthode Technique Automobile Expert
La MTA expert est un outil en ligne destiné aux experts en mécanique et en carrosserie, pour effectuer tous types de réparations sur une voiture.
Voir le descriptif