Que signifie votre code Code Défaut BMW ?
Grace au système OBD, les
Bmw
fabriqués après 1996 sont normalement équipés d'une prise diagnostique OBD.
Si l'ordinateur de la voiture rencontre un problème,un code d'erreur ou un code de diagnostic (DTC)
sera stocké dans la mémoire de l'ECU de la voiture.
Avec un lecteur OBD branché sur le port OBD (On-Board Diagnostics) de la voiture, vous pouvez lire la liste des codes stockés, et donc découvrir quel est le problème.
Les codes suivent une formule permettant de savoir généralement quel est le problème avant même de regarder le tableau ci-dessous.
Nous vous présentons ci-dessus une liste très complète des différents codes défauts possibles.
Si le code défaut de votre auto s'affiche au tableau de bord, vous n'aurez peut-être même pas besoin d'un lecteur OBD . il sera dans la liste .
Réparer le code défaut de votre auto, c'est potentiellement simple à faire avec vos revues et méthodes techniques.
Réparer le code défaut de votre auto, c’est potentiellement simple à faire avec nos revues et méthodes techniques
| Code | Libellé |
|---|---|
| E6AC63 | ICM interface (vehicle adaptation, ID: 272.6.8): Signal invalid |
| E6AC64 | ICM interface (ride-height, vehicle, ID: 0x0E4): Signal invalid |
| E6AC67 | DSC interface (status, DSC stabilisation, ID: 0x173): Signal invalid |
| E6AC7B | Convertible Top Module (CVM) interface (status, convertible top, ID: 0x342): Signal invalid |
| E6AC7C | Signal (status, convertible top, ID: 0x342) undefined: transmitter: CVM |
| E6AC7D | ICM interface (status, tyres, ID: 0x369): Signal invalid |
| E6AC7F | ICM interface (status, tyres, ID: 0x369): Signal invalid |
| E6AC84 | ICM interface (data, driving dynamics sensor, extended, ID: 56.0.2): Signal invalid |
| E6AC85 | Signal (data, driving dynamics sensor extended, ID: 56.0.2) undefined: transmitter: integrated chassis management (ICM) |
| E6AC86 | ICM interface (data, driving dynamics sensor, extended, ID: 56.0.2): Signal invalid |
| E6AD02 | DSC interface (actual braking torque, sum, ID: 0x0EF): Signal invalid |
| E6AD05 | DSC interface (actual wheel speed, ID: 46.0.1): Signal invalid |
| E7040B | Integrated Automatic Heating and Air conditioning (IHKA), K-CAN: Wiring fault / electrical fault |
| E70414 | Integrated Automatic Heating and Air conditioning (IHKA), K-CAN: Communication fault |
| E70C00 | Fresh air flap motor or fresh air / recirculated air flap motor: does not respond |
| E70C01 | Recirculated air flap motor: does not respond |
| E70C02 | Defroster flap motor: does not respond |
| E70C03 | Left ventilation flap motor or footwell flap motor ventilation: does not respond |
| E70C04 | Ventilation flap motor, right : does not respond |
| E70C07 | Footwell flap motor, left: does not respond |
| E70C08 | Footwell flap motor, right: does not respond |
| E70C09 | Rear left air distribution flap motor or rear compartment flap motor: does not respond |
| E70C0B | Front left mixing flap drive or front mixing flap drive: does not respond |
| E70C0C | Mixing flap drive, front right: does not respond |
| E70C0D | Mixing flap drive, rear left or mixing flap drive, rear: does not respond |
| E70C0E | Rear passenger compartment right mixing flap drive: does not respond |
| E70C12 | Flap motor for indirect ventilation: does not respond |
| E70C15 | Air distribution flap drive flap motor does not respond |
| E70C1A | Rear ventilation flap motor: does not respond |
| E70C1B | Air distribution flap drive: does not respond |
| E70C1E | AC-LIN-1: Defroster flap motor (IHKA-High) / AC-LIN-1: air distribution flap motor (IHKA-Basis): Not responding |
| E70C22 | AC-LIN-1: Outer right ventilation flap motor: Not responding |
| E70C23 | AC-LIN-1: Air distribution flap motor for left ventilation and footwell: Not responding |
| E70C24 | AC-LIN-1: Right ventilation and footwell air distribution flap motor: Not responding |
| E70C25 | AC-LIN-1: Rear left footwell flap motor: Not responding |
| E70C26 | AC-LIN-1: Rear right footwell flap motor: Not responding |
| E70C27 | AC-LIN-1: Front left ventilation flap motor: Not responding |
| E70C28 | AC-LIN-1: Front right ventilation flap motor: Not responding |
| E70C29 | AC-LIN-1: Rear left ventilation flap motor: Not responding |
| E70C2A | AC-LIN-1: Rear right ventilation flap motor: Not responding |
| E70C2B | AC-LIN-1: Ambient/recirculation air flap motor: Not responding |
| E70C2C | AC-LIN-1: Ambient air motor does not respond |
| E70C2D | AC-LIN-1: Blower end-stage does not respond |
| E70C30 | AC-LIN-2: Electric air-conditioning compressor not responding |
| E70C31 | AC-LIN-2: Electric air-conditioning compressor communication interrupted |
| E70C32 | Air conditioning control box: does not respond |
| E70C34 | Audio control panel: Communication with IHKA control unit disrupted |
| E70C35 | Air conditioning control box: Communication with heating/air conditioning control unit disrupted |
| E70C3A | Electric auxiliary heater: EDH does not respond |
| E71400 | Message missing (ambient temperature, 0x2CA): receiver: IHKA, transmitter: instrument cluster |
| E71401 | Message (outside temperature, 0x2CA) faulty: receiver integrated heating and automatic climate control (IHKA), transmitter KOMBI |
| E71403 | Message (A/C control, remote control, 0x1DA) faulty, receiver: IHKA, transmitter: FEM |
| E71405 | No message (LCD brightness control, 0x393): receiver: IHKA, transmitter: instrument cluster |
| E71407 | Message (Status Solarsensor, 0x3D3): Absent, receiver: IHKA, transmitter: BDC |
| E71408 | Message (Status BFS, 0x22A): Absent, receiver: IHKA, transmitter: BDC, SMBF, REM |
| E71409 | Message (Status pressure refrigrant loop, 0x2D2): Absent, receiver: IHKA, transmitter: BDC |
| E7140A | Message (Status FAS, 0x232): Absent, receiver: IHKA, transmitter: BDC, SMFA, REM |
| E7140E | Message (Status Sensor AUC, 0x2D0): Absent, receiver: IHKA, transmitter: BDC |
| E7140F | No message (vehicle identification number, 0x380): receiver: IHKA, transmitter: Car access system (CAS) |
| E71412 | Message fault (units, 0x2F7): receiver: IHKA, transmitter: instrument cluster |
| E71413 | No message (torque for crankshaft 1, 0x0A5): receiver: IHKA, transmitter: Engine |
| E71414 | Message (vehicle speed, 0x1A1): receiver: IHKA, transmitter: integrated chassis management (ICM) |
| E71417 | Signal (ambient temperature, 0x2CA) invalid, transmitter KOMBI |
| E7141C | Interface BDC (Status Solarsensor, passenerg side, 0x3D3): Signal invalid |
| E7141D | Interface BDC (Status Solarsensor, driver side, 0x3D3): Signal invalid |
| E71420 | Interface BDC (Data pressure sensor refrigerant loop, 0x2D2): Signal invalid |
| E71421 | Interface BDC, SMFA, REM (Status FAS, Seat heating, 0x232): Signal invalid |
| E71425 | Interface FKA (status air conditioning operation, driver's side rear , 0x23E): Signal invalid |
| E71426 | Interface FKA (status air conditioning operating, passenger's side rear, 0x23E): Signal invalid |
| E71429 | Interface BDC (Data Sensor AUC, 0x2D0): Signal invalid |
| E7142E | FHK interface (driver's side rear ventilation temperature, 0x2C2): Invalid signal |
| E7142F | FHK interface (passenger's side rear ventilation temperature, 0x2C2): Invalid signal |
| E71431 | Engine interface (crankshaft torque 1, speed, 0xA5): Signal invalid |
| E71432 | Integrated chassis management (ICM) interface (Vehicle speed, centre of gravity, 0x1A1): Signal invalid |
| E7143A | No message (status FAS, 0x232, FA): Missing, receiver: IHKA, transmitter: FEM, REM, SMFA |
| E7143C | Interface EME (Air conditioning compressor, maximum power, 0x38C): Signal invalid |
| E7143D | Message fault (status, high voltage accumulator 1, 0x1FA): receiver: IHKA, transmitter: SME |
| E7143E | Interface SME (Status High voltage battery heat exchanger temperature, 0x1FA): Signal invalid |
| E7143F | Interface SME (Status High voltage battery pack, cooling request, 0x1FA): Signal invalid |
| E71440 | No message (status, valve, high-voltage battery cooling, 0x389): receiver: IHKA, transmitter: junction box electronics (JBE) |
| E71441 | Interface EME (Status High voltage battery pack cooling valve, 0x389): Signal invalid |
| E71447 | No message (status, AUC sensor, 0x2D0, FA): IHKA receiver, FEM transmitter |
| E7144A | Message (status solar sensor, 0x3D3) faulty: receiver integrated heating and automatic climate control (IHKA), transmitter FEM |
| E7144B | Interface HKA (Status Climate control, Front, 0x1B2): Signal invalid |
| E7144C | Message (Status High voltage battery pack cooling valve, 0x1B2): Signal invalid |
| E7144D | Message fault (status of valve for high-voltage battery cooling, 0x389): receiver: IHKA, transmitter: Electrical machine elctronics (EME) |
| E7144F | Message fault (status, valve, A/C compressor, 0x2D6): receiver: IHKA, transmitter: FEM |
| E71450 | Message (ZV and lid status, 0x2FC): receiver: IHKA, transmitter: Car access system (CAS) |
| E71452 | CAS interface (status, central locking system, 0x2FC): Signal invalid |
| E71453 | Message fault (air conditioning compressor control, 0x38C): receiver: IHKA, transmitter: Electrical machine elctronics (EME) |
| E71457 | Message (operation of wiper button, 0x2A6): receiver: IHKA, transmitter: junction box electronics (JBE) |
| E7145A | Signal (request for heating current, DME, 0x1B9) invalid, transmitter DME/DDE / EDME |
| E71462 | Signal (fuel tank level, 0x330) invalid, transmitter KOMBI |
| E71463 | Signal (fuel tank level, 0x330) invalid, transmitter KOMBI |
| E71464 | Signal (fuel tank level left, 0x330) invalid, transmitter KOMBI |
| E71465 | No message (configuration, switch, driving dynamics 2, 0x3E6): receiver: IHKA, transmitter: integrated chassis management (ICM) |
| E71466 | Message (configuration of switch for driving dynamics 2, 0x3E6) faulty: receiver: IHKA, transmitter: integrated chassis management (ICM) |
| E71467 | No message (after-running period, terminal 30, fault-controlled, 0x3AC): IHKA receiver, FEM transmitter |
| E71468 | Message (after-running period, terminal 30 fault-controlled, 0x3AC) incorrect: receiver: IHKA, transmitter: FEM |
| E7147F | Integrated automatic heating / air conditioning system: Internal control unit fault |
DEFINISSEZ VOTRE MARQUE POUR ACCEDER A VOS CODES DEFAUTS
LES PRODUITS DISPONIBLES POUR VOTRE AUTO
-
Revue technique RTA
Revue Technique Automobile
La revue technique de référence depuis 1946. La RTA est une revue papier pour tous publics, qui vous permet d'effectuer les petites et les grosses réparations
Voir le descriptif
-
Entretien courant MTA
Méthode Technique Automobile
La MTA est issue de nos outils destinés aux pros de l'auto. Ces méthodes en ligne permettent d'effectuer les opérations de maintenances de votre auto (filtres, courroies, etc.)
Voir le descriptif
-
Toutes réparations MTAx
Méthode Technique Automobile Expert
La MTA expert est un outil en ligne destiné aux experts en mécanique et en carrosserie, pour effectuer tous types de réparations sur une voiture.
Voir le descriptif